|
|
Example 5 (CB-04)
Battery Cluster Example providing 48V DC (regulated) for powering a large system
|
|
|
- Battery clusters allow you to scale the power of a battery system while scaling the power output and capacity and keeping the charge time constant to ~3.5 hours for a full charge.
- Li-ion battery packs provide the highest power density for a given weight of any commercial technology.
- Our Li-ion packs have integrated safety circuits and fuel gauges. These manage the safety policy and won’t allow unsafe operation. They protect against over charge, over discharge, under / over temp discharge and pause charging when the pack temp is too high, etc.
- The system can be packaged in instruments, equipment or robots that need the lightest highest density power possible with quick recharge times and high safety.
- Li-ion packs don’t release dangerous gasses as do older battery technology.
- The controllers provide RS232 ASCII data about the system power consumption and the run time to empty or full. The detailed status of every battery pack in the system is available via this data stream.
- Typical applications: AUV/ UUV Power source, Robot power source, portable instruments for field use, portable medical equipment such as X-Ray machines..
|
|
| Parts List: (OceanServer Part numbers) |
| Qty |
Part Number |
Description |
32 |
BA95HC-FL or BA95HCL-FL
|
Battery Pack: 95WHr Li-Ion Smart Battery Pack, 14.4V, 6.6Ah |
| 4
|
XP-08 |
Battery Controller, supports 8 smart battery packs, integrated charger. |
| 2 |
PS600
|
AC-DC 18V Power Supply (600W) provides power for charging or operation
(Could be any of the other power supply options) |
| 1 |
CB-04
|
Mux Module connects up to four MP-xx or XP-xx controllers to provide a single data stream and point of management for the system. One RS232 (19200 baud) connection provides the data for the compete battery system and provides shutdown signals to the output DC-DC converters. |
| 4 |
19-00026-20 |
Cable: connects MP-08 to DC-DC converters
|
| 1
|
19-00044-30
|
Cable: Output power cable form DC2U-1V to system power for 48V power output. |
| 2 |
PS600
|
Power supply, 18V output, 600W, parallel operation for charging the system. |
| 4 |
DC2U-1V
|
DC-DC Converter: Provides 48V regulated output (240W each; 960
Watts for 4 units) can be used in
parallel to support large power requirements |
0-1 |
19-00011-00
|
Cable: Serial bulkhead cable, connects the module RS232 output port to a bulkhead for system monitoring data with minibats program. |
0-1 |
19-00010-00
|
Cable: Serial port connector cable, IDC10 to DB9 brings serial port from the BBDC-02 module for connection to a host PC for monitoring data. |
|
