OceanServer
offers solid state, 3 - Axis Attitude Sensors
for a variety of applications where size, functionality and
cost are the keys to successful integration. The
compasses are tilt compensated and can be connected via USB, RS232 or TTL .OceanServer compass products are utilize by thousands
of customers worldwide to provide precise heading, roll and pitch
data.
OS4000-T Solid State Tilt
Compensated Nano Compass (TTL)
The OS4000-T Nano Compass is
one of the world's tiniest 3 Axis tilt compensated compass
solutions. Includes all the same powerful features of
the OS5000 family in a board mount package priced for
volume applications
>
Ultra
Low Cost Design
>
Nano
Size
: .6” x .6” PCB
>
A
single gram and .5 degrees accuracy!
OS5000-S Solid State Tilt Compensated
3 Axis Digital Compass (Serial)
OS5000-S (RS232) offers solid
state tilt compensated design in a tiny 1" square
footprint
>
Ultra
Low Cost Design
>
Micro
Size
: 1” x 1” PCB
>
Power:
3.3V regulated, 3.3-5V unregulated
OS5000-US Solid State Tilt Compensated
3 Axis Digital Compass (USB & Serial)
OS5000-US combines a small
size with the flexibility of both an USB and RS232 Serial
connection:
>
Tiny
1" Square, Low Cost Design
>
Auto
detects either USB or Serial
>
Power:
5V regulated USB or 3.3V - 5V RS232
OS5000-T Solid State Tilt Compensated
3 Axis Digital Compass (TTL)
OS5000-T provides the standard
features of the OS5000-S (minus RS232 support) with a TTL
interface. Important note: the OS5000-T only supports TTL
levels.
OS5000-USD Solid State Tilt Compensated
Compass with Depth Measurement
OS5000-USD provides the standard
features of the OS5000-US with depth measurement utilizing a
transducer. Compatible pressure transducers operate in the
0.5V – 4.5V direct output range (such as the MSI
MSP-340).
>
Tiny
1" Square Design
>
Depth
Accessed via RS232 Port
>
Power:
5V regulated USB or 3.3V - 5V RS232
Compass models come with Microsoft
Windows compatible software for evaluation and
testing. The 5000-US software includes a USB to serial
port driver, facilitating a quick connection between the
compass and your Windows based system. Compasses can also be
connected to a host system using Microsoft Hyperterm or
other terminal programs.
When power is applied, they output sensor data at the preset
rate. You can change the rate or set output to 0, to stop output
completely. The compass firmware provides basic functions for
soft and hard iron calibration and configuration.
Additional Specifications for
all Products:
- Tilt compensated compass heading
- Yaw, Pitch and roll to 0.1 degree resolution
- Honeywell 3-axis Magnetic sensors
- STM 3-axis Accelerometer (full range tilt compensation)
- Offer both soft and hard iron calibration routines
